Description
| For Downloads | Data Sheet – User Manual – Other Documents – Certificates | |
| Setup Software | Testing Software | |
| For Purchase | Call / WhatsApp / Telegram: +91 8148834200 | |
| For Technical Support | Call / WhatsApp / Telegram: +91 8148834211 | |
Product Description
This section of the air temperature and humidity sensor, the overall do double waterproof treatment, completely prevent condensation damage. Note: The sensor measures the relative humidity of the air in the soil, not the soil moisture, even when buried in the soil.
Output | I2C interface |
Cable length | 0.5m , customerized |
Chip | SHT10 SHT20 SHT30 optional |
Voltage | 2.1V to 3.6V |
SHT10: – full scale calibration, two-wire digital output; – Humidity measurement range: 0 to 100% RH; – Temperature measurement range: -40 to +123.8 °C; – Humidity measurement accuracy: ±4.5% RH – Temperature measurement accuracy: ±0.5 °C – Response time: 8s (tau63%); – Low power consumption 80μW (12-bit measurement, 1 time / s) SHT20: Dimensions 3 x 3 x 1.1 mm Output I2C Digital, PWM, SDM Voltage range 2.1 – 3.6 V Energy consumption 3.2μW (8-bit, 1 measurement/second) Humidity working range 0 – 100% RH Temperature Operating Range -40 – 125°C (-40 – 257°F) Humidity reaction time 8 sec (tau63%) SHT30: 1. Humidity measurement range: 0~100%RH 2, humidity measurement accuracy: SHT30 ± 3% RH; 3, temperature measurement range: -40 ~ 125 ° C 4, temperature measurement accuracy: SHT30 SHT31 ± 0.3 ° C SHT35 ± 0.2 ° C 5, working voltage: 2.4 ~ 5.5VDC (wide voltage) 6, I2C interface output
Details Images
Feature 1, the original imported sensors. 2, all with 10k pull-up resistor and 0.1uf filter capacitor 3, have all done double waterproof treatment. 4. 100% power-on aging and inspection before leaving the factory. 5. Connection mode: brown—VCC black—GND yellow—DATA blue—CLK
